The third version of the micro-computer
Raspberry Pi pleased their fans high-performance, advanced features and is
still affordable price.
Externally, the box Raspberry Pi 3 differs from previous versions of the packages only inscriptions
on the reverse side and the logos of the wireless interfaces. Inside -
board in an antistatic bag and a couple of pieces of paper (information about
the device and instructions for the first call).
New "Malinka" is almost
completely repeats the previous version (except that the first was unsoldered
analog video output, but in the third model, as in the second, it is
implemented through the 4-pin 3.5 mm mini-jack).
Small differences can be seen if you look
closely. Pay a little bit compared to rearrange the latest revision of the
second version of Raspberry Pi, and all in order to place a tiny antenna Wi-Fi
and Bluetooth. The most important change in the Raspberry Pi 3 was the new
64-bit platform from Broadcom with a higher frequency (1 200MHz vs. 900MHz). Unfortunately,
users only see the increased frequency. 64-bit instruction set is not
implemented. Since the core of the SoC system all built on the same ARMv7
architecture does not require a separate kernel - it is possible to use the
system from the Raspberry Pi 2(will not work on the first version: it is
based on the ARMv6). To understand the performance: CPU on the same basis
Cortex-A53 smartphones are set to the primary and secondary levels.
Another important point for users has been
the emergence of wireless interfaces soldered onto the motherboard. This
will save on the purchase of individual sticks 5-15 dollars. It works with
two types of Bluetooth 4.1: Classic and Low Energy. This will work with
almost any peripherals, including headsets, keyboards, computer mice and home
media systems.
BTW, you can select the Raspberry Pi 3 at
Banggood. Besides, you can easily get other electrical accessories (e.g. DC-DC Step Down Module) there with high quality and reasonable prices.
没有评论:
发表评论