Unpleasant sweet, sugary smell appears in
the car when the cooling system leaked coolant. This initial stage of the
problem and deal with it easily. But if the temperature sensor shows more high
degree, through the bars of the radiator starts to go steam, and from the
radiator liquid drips - clearly, it is necessary to change the radiator. You
may well be able to do it yourself.
To replace the heat sink should be a
comfortable place for repairs, new radiator, a liquid - coolant, simple tools
and household gloves. Give the opportunity to cool his car. Open the bonnet.
Carefully loosen the clamps on the coolant hoses with hose clamp tool.
Disconnect the hose from the nozzle - to
liquids accidentally mixed together. Substitute under the radiator any
unnecessary bowl or other container and allow to draining the radiator.
Remove the radiator. To do this, unfasten
the buckles. Carefully inspect the old and the new radiator - make sure they
are the same and you will not have problems with the installation. Place the
new heat sink into place. Do not damage his plate, it can worsen heat.
Fasten clamps, reinstall hoses and fittings.
Fill in heat transfer fluid and let the car stand. Start the engine. If there
are no leaks, then everything is in order. You have successfully changed the
old radiator to the new. BTW, you can select the radiator hose clamp removal tool at Banggood. Besides, you can easily get other electrical
accessories (e.g. flexible silicone wire) there with high quality and
reasonable prices.
没有评论:
发表评论