How to Compress Lan

You want to make your local network or simply to connect two computers to play on the network, but there is a problem with how to do it? Do not worry. Everything is very easy and simple. You will need a little patience and precision, as well as consumables.

You will need crimping Tools, RJ-45 connectors, waterproof crimp connectors, UTP cables, etc. BTW, you can buy bootlace ferrule crimping tool at Banggood. Besides, you can easily get other electronic accessories (e.g. 80mm hole cutter) there with high quality and reasonable prices.

For cutting power cord take the sharpened knife. It is best to do this you will approach stationery knife cutter. Carefully apply them to a shallow longitudinal incision along the edge of the cable about 2.5 cm in length so as not to damage the wires. Then remove the outer sheath of the cable. You will see eight conductors, twisted pairs. Gently spread them in different directions, according to the color scheme of your connection method, and then separate the core from one another. Next, you need to align the wires one by one. As a rule, it becomes apparent that one or more wires slightly longer or shorter than others. Cut them to 1-2 mm to the length of all veins were similar.

Pick up an RJ-45 connector. Inside it you can see the guides for your cable wires. Pick up to cut cable wires and carefully insert them into the connector. Make sure that each of the cores hit the corresponding groove of the guide slot.

Pick up a compressing tool. Before you insert the connector in it, check that all UTP-cable conductors came to the inner wall of the RJ-45 connector. Now insert the connector into the appropriate size connector and firmly squeeze it there. Finally, check the quality of crimping, by jerking the cable.