Practical Tool for Cutting Glass at Home, Glass Cutter

At home, sometimes you have to face the problem of cutting glass. With no complicated tools, you can do it. Cut glass diamond or roller glaziers. When working with any glass cutter, remember that the glass must be clean and dry. Old glass rinse and dry. Wipe cloth dipped in turpentine and dry again.

Put on the table, a blanket, a glass top on it. After cutting, the fabric may contain pieces of glass. Lay the fabric between the glass and any old oilcloth. The table must be absolutely smooth and stable. Cut the glass put so that it rested across the plane of the surface of the countertop. Take the wide wooden ruler. At its base paste pieces of rubber from the rubber medical bandage to keep it from sliding on glass. BTW, you can buy cheap glass cutter at Banggood. Besides, you can easily get other electronic accessories (e.g. cheap endoscope) there with high quality and reasonable prices.

To get high-quality cut, lubricate wheel glass cutter in kerosene. Spend a tool on the glass. Res start to do with the far edge of the glass. Line lead without stopping to him. Spend a cut to its full length and with the same effort. Roller glass cutter should be hold strictly perpendicular to the plane of the glass. Diamond - hold almost vertically like a pencil. With the correct glass cutting line will turn colorless and thin. Before reaching the end by 5 mm, reduce the pressing force that the tool does not come down from the glass. Do not perform cut twice on the same line. If you want to make the next cut, you need to retreat to a distance of 1 mm from the previous one.

Proceed with the tapping scratched stripes on the surface of the glass. To do this, apply a glass cutter is not strong blows on the other hand on the cut line. Incised glass cutter line should turn into a crack. Put the glass on the edge of the table top and a sharp jerk downward smash his intended line. If a small piece was left, then break off its special cutout in the glass cutter.