How to Disassemble the Mobile Phone

Popularity modern mobile phone is due to favorable combination of elegant forms and rich functionality. These phones have specific disadvantages for self-help that you need to know how to disassemble. You will need a cell phone, Screwdriver, and a thin protective film for the display. BTW, you can buy iPhone screwdriver at Banggood. Besides, you can easily get other electronic stools there with high quality and reasonable prices.

Turn the telephone cot so as to obtain access to the battery compartment. Carefully slide the cover to remove the battery. If you just open the compartment does not work, do not press too hard. Wipe the back of the phone with a damp cloth, to remove dust and dirt out of the cracks between the battery cover and the housing. Use an ordinary wooden toothpick as a small arm and try to pull out the battery from the phone again. 

Once the battery is disconnected safely, proceed to the analysis of the phone. Remove the four corner screw. It is better to work a magnetized screwdriver to prevent the loss of fasteners and their falling into the phone. Gather a small bag or box for cogs, their dimensions are so small that the careless attitude to lose their worth nothing. Buying a new fixture can take considerable time.

To open the case, use a mediator or an old credit card. Gently slide the selected tool on both sides of the body, to release the latch. Pay special attention to the mounting body at the hinge, which is responsible for the phone cover. Latch in this place is very fragile, besides being under constant load. Work carefully and do not rush, because the broken latch will make senseless all the work done.

Analyzing the screen, paste pre-protective film to prevent damage to the transparency and avoid scratching. Be very careful when removing the seal gum. If it breaks, then the phone assembly gum will have to put on the glue. This means that the ability to disassemble the phone display no longer be presented.