Video cameras are supplied USB-A cable to
connect to your computer, allowing you to use their functionality in a Web
camera with high resolution. This can be accomplished in two ways.
You will need
- The device driver;
- The 1080P video camera;
- Webcam DV program.
If your camcorder can be connected to a
computer via the USB-interface to check the presence of disk configuration with
the driver, the installation of which will allow you to perform the pairing
devices in webcam mode. Insert the disc into the drive and follow the
instructions of the installer menu, install the software on your computer.
Often the drivers for using the camcorder as a web camera installed a separate
element, which is necessary to tick the list of installable software components
in the computer.
After a complete video camera driver
installation, restart the computer and connect the camera to it using the
USB-cable, the included in the purchase, at the same time after a short period
of time the unit will be defined in the system. The camera can be configured as
a driver of the utility, as well as from the control panel, the computer
devices in the "Printers, scanners, cameras." Picture quality is
adjusted directly involve its program taking into account the outgoing internet
connection speed and configuration of your computer to the processor and
graphics card. BTW, you can select the video camera at Banggood. Besides, you
can easily get other electrical accessories (e.g. UV curable solder mask) there with high quality and reasonable prices.
If your model is not provided by the
above-described video camera connection mode, use the demo version Webcam DV
software. Its principle of operation is based on the fact that it causes the
operating system to recognize the camcorder connected to it as a full-fledged
web camera.
没有评论:
发表评论